
HN80E-5X 5-Axis Horizontal Machining Center (5-Axis HMC)
- Rigid machine body.
- Machine X&Z base of HN100D-II – a rigid and boxway style machine.
- Excellent stability and good dampening properties.
- High torque spindle.
- Rigid trunnion table and low frequency machining.
- High load roller BRG and double-lead worm gear for A and B axes, high torque drive.
- Variety of 5-axis machining support software.
Specifications item | ITEM | HN80E-5X | |
---|---|---|---|
TRAVEL & WORK CAPACITY | X axis travel (longitudinal table) | Metric1250 mm | Inch49.2" |
Y axis travel (vertical head) | 1230 mm | 48.4" | |
Z axis travel (column in & out) | 1200 mm | 47.2" | |
A axis travel (trunnion rotation) | +10˚ ~ -100˚ | +10˚ ~ -100˚ | |
B axis travel (pallet rotation) | 360˚ | 360˚ | |
Max Work / Swing Diameter | 1250 mm | 49.2" | |
Max Work / Height | 1000 mm | 39.4" | |
TABLE | Table working surface | 800 x 800 mm | 31.5" x 31.5" |
Table increments | 0.0001˚ | 0.0001˚ | |
Maximum mass on pallet | 1500 kg | 3300 lbs | |
SPINDLE | Spindle speeds | 6000 min-1 | 6000 rpm |
Spindle speeds OP | 12000 min-1 | 12000 rpm | |
Spindle speeds OP | 15000 min-1 | 15000 rpm | |
Spindle taper | CAT 50 | CAT 50 | |
FEEDRATE | Rapid traverse X axis | 30 m/min | 1181 ipm |
Y axis | 30 m/min | 1181 ipm | |
Z axis | 30 m/min | 1181 ipm | |
A axis | 6 min | 6 rpm | |
B axis | 11.1 min | 11.1 rpm | |
AUTOMATIC TOOL CHANGER (ATC) | Tool magazine capacity | 62 [88/128/175/255/383] Chain [126/178/230/308] Matrix | 62 [88/128/175/255/383] Chain [126/178/230/308] Matrix |
GENERAL | Machine weight approx. | 22200 kg | 48942 lbs |
Control | Fanuc 30iM | Fanuc 30iM |
PDFs
HN80E-5X Flier Download PDF